Fabric Expansion Joint Roller Machine Manufacturing Planning
Keywords:
fabric expansion joint rolling machine manufacturing planningAbstract
The purpose of planning this Fabric Expansion Joint rolling machine are (1) making detailed working drawings and parts thereof, (2) planning safe construction and helping the work, (3) This fabric rolling machine is designed to facilitate the rolling process in order to produce maximum density and does not require a large place for placement. The design concept of this fabric rolling machine refers to the stages of the Pahl and Beitz design concepts, namely: (1) planning and task description, (2) product concept design, (3) product design, (4) detailed design. The tools used in designing this fabric rolling machine are: (1) paper, (2) pencil, (3) computer, (4) autodesk inventor software, (5) printer. The steps of the fabric rolling machine planning process are: (1) searching for finished products available in the market, (2) selecting materials and production techniques, (3) exploring space constraints, (4) identifying product components, (5) developing interface or point of contact between two components, (6) giving shape, (7) evaluation, (8) improvement of materials and production methods, (9 ) improvement of shape. The result of the design is the design and working drawing of the fabric roller machine product. Working drawings consist of: working drawings of the frame and its parts, slides and their parts, working drawings of the pusher handle and its parts, working drawings of gear sprockets, working drawings of sliding and fixed shafts, working drawings of rollers. This fabric rolling machine has the following specifications: (1) dimensions of 770 x 1300 x 770 mm. (2) has an electric motor propulsion of 1/5 HP, (3) uses an electric system as a reversal of the direction of rotation of an electric motor, (4) a transmission system uses chains and couplings, (5) uses a 1:60 reducer. Fabric rolling process takes ±1 hour for 1x Fabric Expansion Joint rolling process with a length of 50 meters.
References
Ahmadi, R. H. & H. Wurgaft. (1994). Design for synchronized flow manufacturing. Management Science, 40(11), 1469–83.
Carlson, Carl. (2012). Effective FMEAs: Achieving Safe, Reliable, and Economical Products and Processes using Failure Mode and Effects Analysis. Wiley. New York.
Chowdhury, Subir & Genichi Taguchi. (1999). Robust Engineering. McGraw-Hill, New York.
Dimarogonas, A. D. (1989). Computer Aided Machine Design, First Published. Prentice Hall. New York.
Darmawan, H. (2004). Pengantar Perancangan Teknik (Perancangan Produk), Edisi II, ITB, Bandung.
Darmawan, D. (2006). Teknik Praktis Menulis Karya Ilmiah, Metromedia Education, Surabaya.
Djaelani et al. (2021). Pemberdayaan Masyarakat di Sekitar Universitas Sunan Giri Surabaya melalui Pelatihan Keterampilan Las Listrik, Jurnal Pendidikan, Penelitian, dan Pengabdian Masyarakat, 1(1), 33-38.
Dym, Clive L., P. Little, & E. Owen. (2014). Engineering Design: A Project-Based Introduction. 4th ed. John Wiley & Sons, New York.
Giesecke, F. E., I. L. Hill, A. E. Mitchell, J. E. Novak, H. C. Spencer, & J. T. Dygdon. (2012).Technical Drawing with Engineering Graphics. 14th ed. Pearson/Prentice-Hall, Upper Saddle River, NJ.
Gershwin, S. B., R. Akella, & Y. F. Choong. (1985). Short-term production scheduling of an automated manufacturing facility. IBM Journal of Research & Development, 29(4), 392–400.
Gunawan, A., Yuliana, D. Darmawan, & S. Arum. (2012). Manajemen Terapan dan Bisnis Spektrum Nusa Press, Jakarta.
Johri. P. K. (1990). A heuristic algorithm for loading new work on circuitpack assembly lines. International Journal of Production Research, 28(10), 1871–83.
Juhana, O., & M. Suratman. (2000). Menggambar teknik mesin dengan standar ISO. Pustaka Grafika. Bandung.
Mardikaningsih, R. & D Darmawan. (2020). Sistem Pengendalian Mutu. Metromedia, Surabaya.
McGrath, K. & M. I. T. Maslennikov. (2021). Study of the Supply-demand Value Chain in E-Commerce, International Journal of Work Innovation, 2(4), 390-404.
Mott, R. L. (2009). Elemen-Elemen Mesin Dalam Perancangan Mekanis Buku 1. Andi. Yogyakarta.
Niemann, G & H Winter. (1992). Elemen Mesin Jilid 2. Erlangga, Jakarta.
Suga, S. K. (2002). Dasar Perencanaan dan Pemilihan Elemen Mesin. Pradnya Paramita. Jakarta.
Ullman, David G. (2015). The Mechanical Design Process. 5th ed. McGraw-Hill, New York.
Zainun, A. (1999). Element Mesin I. PT Refika Aditama, Bandung.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 International Journal of Service Science, Management, Engineering, and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Most read articles by the same author(s)
- Ella Anastasya Sinambela, Didit Darmawan, Bayar Gardi, Frederika Josephine Malaihollo , Cost Control Through Break Even Point Analysis , International Journal of Service Science, Management, Engineering, and Technology: Vol. 1 No. 3 (2022): International Journal of Service Science, Management, Engineering, and Technology (June)
- Muhammad Sukron Djazilan, Didit Darmawan, Entrepreneurship Education and Family Support: The Determinants That Appear Entrepreneurship Interest for Students , International Journal of Service Science, Management, Engineering, and Technology: Vol. 1 No. 2 (2022): International Journal of Service Science, Management, Engineering, and Technology (April)
- Ella Anastasya Sinambela, Didit Darmawan, Bayar Gardi, Production Cost Calculation Analysis Using Variable Costing Method , International Journal of Service Science, Management, Engineering, and Technology: Vol. 1 No. 2 (2022): International Journal of Service Science, Management, Engineering, and Technology (April)
- Louise Elizabeth Radjawane, Didit Darmawan, Construction Project Worker Satisfaction Reviewing from The Role of The Work Environment and Leadership , International Journal of Service Science, Management, Engineering, and Technology: Vol. 1 No. 3 (2022): International Journal of Service Science, Management, Engineering, and Technology (June)
- Arif Rachman Putra, Didit Darmawan, Competitive Advantage of MSMEs in Terms of Technology Orientation and Entrepreneurship Competence , International Journal of Service Science, Management, Engineering, and Technology: Vol. 2 No. 1 (2022): International Journal of Service Science, Management, Engineering, and Technology (August)
- Muhammad Bangsu, Didit Darmawan, Rommy Hardyansah, Suwito Suwito, Mujito Mujito, The Implications of Remuneration, Procedural Justice Principles, and Work Environment Factors on Employee Retention Rate , International Journal of Service Science, Management, Engineering, and Technology: Vol. 3 No. 3 (2023): International Journal of Service Science, Management, Engineering, and Technology (June)
- Rahayu Mardikaningsih, Didit Darmawan, Analysis of Financial Literacy and Risk Tolerance on Student Decisions to Invest , International Journal of Service Science, Management, Engineering, and Technology: Vol. 3 No. 2 (2023): International Journal of Service Science, Management, Engineering, and Technology (April)
- Didit Darmawan, The Effect Of Trust and Saving Experience on Loyalty Through Satisfaction As An Intervening Variable (Case Study of Sharia Bank Customers in Surabaya City) , International Journal of Service Science, Management, Engineering, and Technology: Vol. 2 No. 2 (2022): International Journal of Service Science, Management, Engineering, and Technology (October)
- M. Syaiful Anwar, Mochamad Saleh, Parameters Analysis of The Fcaw Welding Process Against Deformation with Experiment Using the Taguchi Method , International Journal of Service Science, Management, Engineering, and Technology: Vol. 3 No. 3 (2023): International Journal of Service Science, Management, Engineering, and Technology (June)
- Rommy Hardyansah, Jahroni Jahroni, Didit Darmawan, Samsul Arifin, Dharma Setiawan Negara , Student Interest in Becoming Customers of Islamic Banks in Terms of Religiosity and Product Knowledge , International Journal of Service Science, Management, Engineering, and Technology: Vol. 4 No. 1 (2023): International Journal of Service Science, Management, Engineering, and Technology (August)
